Hello, welcome to TLD Automation Technology (Shanghai) Co.， Ltd.
Language：
DC900C series DC Drives
Product introduction
The DC900C series drives is composed of the relevant control elements and is provided to the user after being packaged in a suitable housing. The device inputs standard three-phase alternating current ranging from 110V to 500V. Suitable for controlling separately excited DC motors or permanent magnet DC motors, providing adjustable DC voltage and current for armature and excitation windings. The unit is designed with mounting holes for simple and economical cabinet installation, and pluggable connectors facilitate the installation and removal of components. The control loop is completely isolated from the power loop, which simplifies the connection between the controllers in the system and improves operator safety. The input circuit ADAPTS to the power grid frequency changes between 45-65Hz, and it has a strong immunity to interference from the power grid.
Control and communication The DC900C drives is controlled by a 32-bit microprocessor and offers the following advanced features: - Complex control algorithms cannot be realized with simple analog circuits - Software configurable control loops are based on standard software modules - Serial communication Connects to other drivers or computers for more advanced systems | Power allocation -DC900C four-quadrant reversible; 2 fully controlled thyristors -DC900C two-quadrant non-reversible; 1 full control thyristor - Thyristor control variable magnetic field power supply |
CACT Software Easy to learn CACT host computer programming software; Easy to configure, debug and monitor data: | Chinese and English display The DC900C supports bilingual display in both Chinese and English |
Firmware ｕｐｄａｔｅ Simple and fast RS232 port with host computer Programming and firmware updates; | Response speed Advanced math and logic function modules, faster Speed of response and better control; |
Exciting current 10A | Excitation voltage Excitation output --Vacx0.9 |
Protective measure · High energy MOV'S · Overcurrent tripping · Overcurrent (inverse time limit) · excitation failure · Speed feedback failure · Motor overheating · Thyristor cooling block overtemperature fault (forced air cooling device) · Thyristor "trigger" failure · Thyristor buffer network · Zero speed detection · Static logic · Locked-rotor protection | Typical application · Metallurgical machinery · Plastic machinery · Cables · Material handling · Test bench |
Analog input (5-channel 12bit input with symbol, with short circuit overvoltage protection) 1 current set (-10V-- +10V) 4 ways can be customized Analog output (3 10bit output with overvoltage protection) 1 armature current output (-10V-- +10V or 0V-10V) 2 ways can be customized Digital input (8 input a maximum of 24V, 15mA) 1 way programmable parking 1 way inertial parking 1 enable signal 1 Route starts/runs 4 ways can be customized Digital output (3 output a 24V (Max 30V) 100mA, with short circuit protection) 3 ways can be customized |  |
Reference power supply 0V-- +10V 0V-- -10V 0V-- 24V Velocity feedback type Armature voltage feedback is standard Dc tachometer generator feedback Encoder feedback Communication type: RS485/RS422 Profibus-DP Profinet |
|
DC900C series DC Drives
Installation dimension drawing
DC900C series DC Drives
Specification sheet
Wechat scan code follow us
Sales hotline021-62098390
Technical consultation13723721757
Copyright © 2002-2024 TLD All rights reserved ADD：Room 408, Block B, Weige Creative Park, 59 Xude Road, Shanghai ICP：Shanghai ICP No. 2024095677-1 Sitemap
